ISO/TR 6750-2:2021 pdf – Earth-moving machinery — Operator’s manual — Part 2: List of references.
1 Scope This document provides a list of standards, referenced in ISO 20474-1 and EN 474-1, that include requirements for information to be included in the operator ’s manual. This list of standards is being provided as guidance in creating operator ’s manuals. 2 Normative references There are no normative references in this document. 3 Terms and definitions No terms and definitions are listed in this document. ISO and IEC maintain terminological databases for use in standardization at the following addresses: — ISO Online browsing platform: available at https://www.iso .org/obp — IEC Electropedia: available at https://www.electropedia .org/ 4 References for information to be included in operator’s manual Table 1 contains a list of standards referenced in ISO 20474-1 and EN 474-1 which makes reference to information to be included in the operator ’s manual, if applicable, that are not already included in ISO 6750-1. NOTE 1 Subject titles are either selected from all of or part of the cited ISO titles, e.g. from ISO 5006 “Earth- moving machinery — Operator’s field of view — Test method and performance criteria” to “operator’s field of view”, and from ISO 14990-1 “Earth-moving machinery — Electrical safety of machines utilizing electric drives and related components and systems — Part 1: General Requirements ” to “electric drive systems”. NOTE 2 The subjects are listed in alphabetical order.