ASME A17.1-2010 pdf download.Safety Code for Elevators and Escalators. 1.2.1 Purpose The requirement was introduced in ASME A17.1-2007/CSA B44-07. It is a major departure from past code requirements that only recognized compliance with the requirement stated in the ASME A17.1/ CSA B44 Code. If you did not comply an exception (variance) from an AHJ was required. Now the code formally...
ASME A17.6-2010 pdf download.Standard for Elevator Suspension, Compensation, and Governor Systems. Part 1 covers the general requirements for the more common types of stranded steel wire ropes for hoisting, compensation, and governor applications on passenger or freight elevators. Included in the scope of this Part are steel wire ropes in various grades and constructions from 4 mm to 38 mm...
ASME A112.6.7-2010 pdf download.Sanitary Floor Sinks. 1 GENERAL 1.1 Scope This Standard applies to sanitary floor sinks and includes requirements for material, construction, inspec- tion, testing, and marking. The provisions of this Standard are not intended to prevent the use of any alternate materials or methods ofconstruction, provided any such alternate meets the intent of this Standard. 1.2 Units of...
ASME A112.14.6-2010 pdf download.FOG (Fats, Oils, and Greases) Disposal Systems. 1.2 Units of Measurement Where values are stated in U.S. Customary units and the International System of Units (SI), the U.S. Customary units shall be considered as the standard. In this Standard, gallons (U.S. liquid) per minute is abbreviated “gpm” and liters (metric liquid) per minute is abbreviated “L/min”. 1.3...
ASME A112.19.17-2010 pdf download.Manufactured Safety Vacuum Release Systems (SVRS) for Residential and Commercial Swimming Pool, Spa, Hot Tub, and Wading Pool Suction Systems. 1 GENERAL 1.1 Scope This Standard establishes general requirements, dimen- sions and tolerances, materials, installation instructions, testing requirements, and markings and identification for SVRS devices. SVRS devices are intended to be utilized on pool, spa, hot tub,...
ASME A515-2010 pdf download.SPECIFICATION FOR PRESSURE VESSEL PLATES, CARBON STEEL, FOR INTERMEDIATE- AND HIGHER- TEMPERATURE SERVICE. 1.4 Forplates producedfromcoil andfurnishedwithout heat treatment or with stress relieving only, the additional requirements, including additional testing requirements and the reporting ofadditional test results, ofSpecification A 20/A 20M apply. 1.5 The values stated in either inch-pound units or SI units are to be regarded...
ASME ASP-2010 pdf download.Safety Standard for Automotive Service and Maintenance Products. functional damage: any detrimental, permanent deforma- tion of the ASMP’s structure that results in the loss of sealing capability to its hydraulic or pneumatic compo- nents or both; loss ofmotion; or failure to meet or exceed the design qualification limits established in sections 3-4, 4-4, 5-4, 6-4, and 7-4....
ASME B5.54-2005 pdf download.Methods for Performance Evaluation of Computer Numerically Controlled Machining Centers. 1.1 GENERAL This Standard establishes methodology for specifying and testing the performance of CNC machining centers. Inadditionto clarifyingthe performance evaluation, this Standard facilitates performance comparisons between machines by unifying terminology, general machine classification, and the treatment of environmental effects. It provides a series of tests that should...
ASME B16.14-2010 pdf download.Ferrous Pipe Plugs, Bushings, and Locknuts With Pipe Threads. 5 MARKING Each fitting shall be marked for identification with the manufacturer’s name or trademark, except where a marking is impractical. 6 MATERIALS (a) These fittings are furnished in gray iron, malleable iron, ductile iron, or steel as indicated in the individual tables. (b) The chemical and mechanical...
ASME B16.48-2010 pdf download.Line Blanks. 1 SCOPE This Standard covers pressure–temperature ratings, materials, dimensions, tolerances, marking, and testing for operating line blanks in sizes NPS 1 ⁄ 2 through NPS 24 for installation between ASME B16.5 flanges in the 150, 300, 600, 900, 1500, and 2500 pressure classes. 2 GENERAL 2.1 Definitions 2.1.1 Figure-8 Blank. A figure-8 blank (also called...