ASME N510-2007 pdf download
ASME N510-2007 pdf download.Testing of Nuclear Air Treatment Systems.
1 SCOPE This Standard covers in-service testing of ASME N509 high-efficiency air treatment systems for nuclear power plants. 1.1 Use of This Standard This Standard provides a basis for the development oftestprograms and does notinclude acceptance criteria except where the results of one test influence the per- formance of other tests. Acceptance criteria shall be developed based on the design/function in accordance with ASME N509. This Standard is arranged so that the user may select those portions (tests) that are relevant to their applica- tion. Tests should be performed in the sequence listed in Table 1. Table 1 also lists the recommended minimum frequency for performing these tests. The user must specify which tests shall be performed, and the accept- ance criteria for those tests, in the test program. 1.2 Limitations of This Standard This Standard covers the in-service (operational) test- ing of installed air treatment systems. This Standard shall be applied in its entirety to systems designed and built to ASME N509 specifications. Sections of this Standard may be used for technical guidance for testing air treatment systems designed to other criteria. ASME AG-1, Section TA covers the acceptance-testing program. 2 REFERENCES The following references supplement this Standard and are part of it to the extent indicated in the text. The issue (date/revision) of the referenced document noted below shall be in effect. If no date is listed, then the issue of the referenced document in effect at the time of the purchase order shall apply. ASME AG-1 contains code requirements for nuclear air and gas treatment equipment. These code requirements may be substituted for the requirements listed herein. Industrial Ventilation: A Manual of Recommended Practice (24th edition) Publisher: American Conference of Governmental Industrial Hygienists (ACGIH), 1330 Kemper Meadow Drive, Cincinnati, OH 45240
ANS 3.1-1993, Selection, Qualification, and Training of Nuclear Power Plant Personnel Publisher: American Nuclear Society (ANS), 555 North Kensington Avenue, LaGrange Park, IL 60526 ASME AG-1, Code on Nuclear Air and Gas Treatment ASME N509, Nuclear Power Plant Air-Cleaning Units and Components ASME N511, Standard for In-Service Testing of Nuclear Air Treatment, Heating, Ventilating, and Air Conditioning Systems ASME NQA-1, Quality Assurance Program Requirements for Nuclear Facilities Publisher: The American Society of Mechanical Engineers (ASME), Three Park Avenue, New York, NY 10016-5990; Order Department: 22 Law Drive, P.O. Box 2300, Fairfield, NJ 07007-2300 ASTM D 3803-1991, Standard Test Method for Radioiodine Testing of Nuclear-Grade Gas Phase Adsorbents Publisher: ASTM International (ASTM), 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428-2959 Procedural Standards for Testing, Adjusting, and Balancing of Environmental Systems, 1998 Publisher: National Environmental Balancing Bureau (NEBB), 8575 Grovemont Circle, Gaithersburg, MD 20877 HVAC Systems Testing, Adjusting, and Balancing, 1993-2 Publisher: Sheet Metal and Air Conditioning Contractors’ National Association (SMACNA), 4201 Lafayette Center Drive, Chantilly, VA 20151-1209 3 DEFINITIONS The definitions provided in this section supplement those listed in ASME AG-1, Section AA-1000. activated carbon: an adsorbent of porous structure manu- factured by carbonization of organic material and con- trolled oxidation to increase its microporosity, consisting mainly of elemental carbon in a porous structure. adsorbent: any solid having the ability to concentrate other substances on its surface. adsorber: a device or vessel containing adsorbent.
ANS 3.1-1993, Selection, Qualification, and Training of Nuclear Power Plant Personnel Publisher: American Nuclear Society (ANS), 555 North Kensington Avenue, LaGrange Park, IL 60526 ASME AG-1, Code on Nuclear Air and Gas Treatment ASME N509, Nuclear Power Plant Air-Cleaning Units and Components ASME N511, Standard for In-Service Testing of Nuclear Air Treatment, Heating, Ventilating, and Air Conditioning Systems ASME NQA-1, Quality Assurance Program Requirements for Nuclear Facilities Publisher: The American Society of Mechanical Engineers (ASME), Three Park Avenue, New York, NY 10016-5990; Order Department: 22 Law Drive, P.O. Box 2300, Fairfield, NJ 07007-2300 ASTM D 3803-1991, Standard Test Method for Radioiodine Testing of Nuclear-Grade Gas Phase Adsorbents Publisher: ASTM International (ASTM), 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428-2959 Procedural Standards for Testing, Adjusting, and Balancing of Environmental Systems, 1998 Publisher: National Environmental Balancing Bureau (NEBB), 8575 Grovemont Circle, Gaithersburg, MD 20877 HVAC Systems Testing, Adjusting, and Balancing, 1993-2 Publisher: Sheet Metal and Air Conditioning Contractors’ National Association (SMACNA), 4201 Lafayette Center Drive, Chantilly, VA 20151-1209 3 DEFINITIONS The definitions provided in this section supplement those listed in ASME AG-1, Section AA-1000. activated carbon: an adsorbent of porous structure manu- factured by carbonization of organic material and con- trolled oxidation to increase its microporosity, consisting mainly of elemental carbon in a porous structure. adsorbent: any solid having the ability to concentrate other substances on its surface. adsorber: a device or vessel containing adsorbent.
