ASME B18.10-2006 pdf download
ASME B18.10-2006 pdf pdf download.Track Bolts and Nuts.
Proposing Revisions. Revisions are made periodically to the Standard to incorporate changes that appear necessary or desirable, as demonstrated by the experience gained from the application of the Standard. Approved revisions will be published periodically. The Committee welcomes proposals for revisions to this Standard. Such proposals should be as specific as possible, citing the paragraph number(s), the proposed wording, and a detailed description of the reasons for the proposal, including any pertinent documentation. Interpretations. Upon request, the B18 Standards Committee will render an interpretation of any requirement of the Standard. Interpretations can only be rendered in response to a written request sent to the Secretary of the B18 Standards Committee. The request for an interpretation should be clear and unambiguous. It is further recommended that the inquirer submit his/her request in the following format: Subject: Cite the applicable paragraph number(s) and the topic of the inquiry. Edition: Cite the applicable edition of the Standard for which the interpretation is being requested. Question: Phrase the question as a request for an interpretation of a specific requirement suitable for general understanding and use, not as a request for an approval of a proprietary design or situation. The inquirer may also include any plans or drawings, which are necessary to explain the question; however, they should not contain proprietary names or information. Requests thatare notin this formatmay be rewritten in the appropriate formatby the Committee prior to being answered, which may inadvertently change the intent of the original request.
1 INTRODUCTION 1.1 Scope This Standardcovers the complete generaland dimen- sional data for inch series oval neck and elliptic neck track bolts and square nuts intended for use with these bolts, and recognized as an American National Standard. Sizes in use, but not recommended for new design, are included in the appendices of this Standard. 1.2 Comparison to ISO Standards There is no ISO standard for these products at this time. 1.3 Dimensions The inclusion of dimensional data in this Standard is not intended to imply that all of the products described herein are stock production sizes. Purchasers should consult with suppliers concerning lists of stock produc- tion sizes. All dimensions in this Standard are in inches, unless otherwise stated, and apply to unplated or uncoated products. When plating or coating is specified, the fin- ished product dimensions shall be as agreed upon between supplier and purchaser. Definitions of specified geometric characteristics are in accordance with ASME Y14.5M. 1.4 Options Options, where specified, shall be at the discretion of the manufacturer unless otherwise agreed upon by the manufacturer and the purchaser. 1.5 Terminology All terms used in this Standard are defined in ASME B18.12. 1.6 References Unless otherwise specified, the referenced standard shall be the most recent issue at the time of order placement. ASME B1.1, Unified Inch Screw Threads (UN and UNR Thread Form) ASME B1.3M, Screw Thread Gaging Systems for Dimensional Acceptability—Inch and Metric Screw Threads (UN, UNR, UNJ, M, and MJ) ASME B18.2.1, Square and Hex Bolts and Screws (Inch Series)
ASME B18.2.2, Square and Hex Nuts (Inch Series) ASME B18.12, Glossary of Terms for Mechanical Fasteners ASME B18.18.1M, Inspection and Quality Assurance for General Purpose Fasteners ASME B18.18.2M, Inspection and Quality Assurance for High-Volume Machine Assembly Fasteners ASME B18.18.3M, Inspection and Quality Assurance for Special Purpose Fasteners ASME B18.18.4M, Inspection and Quality Assurance for Fasteners for Highly Specialized Engineered Applications ASME B18.24, Part Identifying Number (PIN) Code System for B18 Fastener Products ASME Y14.5M, Dimensioning and Tolerancing Publisher: The American Society of Mechanical Engineers (ASME), Three ParkAvenue, New York, NY 10016-5990;OrderDepartment: 22 LawDrive, P.O. Box 2300, Fairfield, NJ 07007-2300 ASTM A 183, Specification for Carbon Steel Track Bolts and Nuts ASTM A 354, Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners ASTM A 449, Standard Specification for Quenched and Tempered Steel Bolts and Studs ASTM A 563, Carbon and Alloy Steel Nuts ASTM F 788/F 788M, Standard Specification for Surface Discontinuities of Bolts, Screws, and Studs—Inch and Metric Series ASTM F 812/F 812M, Standard Specification for Surface Discontinuities of Nuts—Inch and Metric Series Publisher: ASTM International (ASTM), 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428-2959 1.7 Part Identifying Number A numbering system for the specification of these standard products is found in ASME B18.24.
