API IP RP 1597-2006 pdf download

API IP RP 1597-2006 pdf download

API IP RP 1597-2006 pdf download.PROCEDURES FOR OVERWING FUELLING TO ENSURE DELIVERY OF THE CORRECT FUEL GRADE TO AN AIRCRAFT. 1.1 PURPOSE This publication is intended to provide a system for use by aircraft fuelling ground staff to assist with the delivery of the correct fuel grade to an aircraft during overwing fuelling. This system consists of procedures as well...

API Bull E2-2006 pdf download

API Bull E2-2006 pdf download

API Bull E2-2006 pdf download.Bulletin on Management of Naturally Occurring Radioactive Materials (NORM) in Oil and Gas Production. Correlations can be developed to relate gamma or exposure rate measurements to concentrations of NORM in scale or sludge. The operator should exercise caution when using relationships of this type because of the many variables that can affect the rela- tionship. Some...

API Bull 2516-2006 pdf download

API Bull 2516-2006 pdf download

API Bull 2516-2006 pdf download.Evaporation Loss From LOW- Pressure Tanks. The term low-pressure tank, as used in this evapora- tion loss bulletin, refers to vessels having a maximum pressure vent setting in the range from just above atmospheric pressure to 15 psig and a vacuum vent setting normally 1 to 2 oz per sq in. The tanks are used for...

API Bull 24-2006 pdf download

API Bull 24-2006 pdf download

API Bull 24-2006 pdf download.Downward Solute Plume Migration: Assessment, Significance, and Implications for Characterization and Monitoring of “Diving Plumes”. Diving plume occurrence can be identified by analyzing depth-discrete shallow groundwater samples for dissolved oxygen, iron, methane, or other parameters that may indicate the presence of overlying unaffected groundwater versus groundwater affected by hydrocarbons or other contaminants. Clean recharge water will...

API Bull 2TD-2006 pdf download

API Bull 2TD-2006 pdf download

API Bull 2TD-2006 pdf download.Guidelines for Tie-downs on Offshore Production Facilities for Hurricane Season. 1 Drilling and Workover Drilling Units 1.1 BACKGROUND The oil and gas industry has experienced rig failures and movement of rig components during recent hurricanes in the Gulf of Mexico. Some, if not all, of the failures are attributable to the tie-down components. Occurrences on both...

API 662-2006 pdf download

API 662-2006 pdf download

API 662-2006 pdf download.Plate Heat Exchangers for General Refinery Services—Part 1—Plate-and- Frame Heat Exchangers. 5 Proposal information required 5.1 The vendor shall complete all information requested on the data sheet. Annex C provides suitable formats. 5.2 For components whose terms and definitions are not fully identified by Clause 3, the vendor shall describe the details of construction and assembly. 5.3...

API 510-2006 pdf download

API 510-2006 pdf download

API 510-2006 pdf download. 1 Scope 1.1 General Application 1.1.1 Coverage This inspection code covers the in-service inspection, repair, alteration, and rerating activities for pressure vessels and the pres- sure-relieving devices protecting these vessels. This inspection code applies to all refining and chemical process vessels that have been placed in service unless specifically excluded per 1.2.2. This includes: a. vessels...

API 5CT-2006 pdf download

API 5CT-2006 pdf download

API 5CT-2006 pdf download.Specification for Casing and Tubing . 1 Scope 1 .I This International Standard specifies the technical delivery conditions for steel pipes (casing, tubing, plain-end casing liners and pup joints), coupling stock and accessories and establishes requirements for three Product Specification Levels (PSL-1, PSL-2, PSL-3). The requirements for PSL-1 are the basis of this International Standard. The requirements...

ANSI API RP 17G-2006 pdf download

ANSI API RP 17G-2006 pdf download

ANSI API RP 17G-2006 pdf download.Recommended Practice for Completion/Workover Risers. ASME, Boiler and pressure vessel code, Section IX:2001, Welding and brazing qualification ASTM A193, Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service ASTM A194, Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure and High Temperature Service ASTM A320, Standard Specification for...

ANSI API RP 17A-2006 pdf download

ANSI API RP 17A-2006 pdf download

ANSI API RP 17A-2006 pdf download.Design and Operation of Subsea Production Systems—General Requirements and Recommendations. 3.1.4 flowline production/injection line, service line or pipeline through which fluid flows NOTE In this part of ISO 13628, the term is used to describe solutions or circumstances of general nature related to a flowline. 3.1.5 flying lead unarmoured umbilical jumper with a termination plate...